Introducing the Guillotine 'STD-9A. " Mechanical guillotine for cutting sheet metal and does not need air supply. In the guillotine metal cutting is done by setting the desired size of the gap between the blades and the downforce is proportional to the cutting forces depending on the thickness of the material being cut. Guillotine mechanical 'STD-9A' designed to operate in environments with earthed and three-phase network voltage 380Vt. When installing a mechanism for cutting the sheet must be securely grounded. The design of cutter has several advantages: – no eyeliner air or hydraulics. – Cutting is carried out Installation of the gap between the knives and downforce is proportional to the cutting forces depending on the thickness of the metal – the mechanism is isolated and self-moves – work on the mechanism can be implemented with assistance remote control or using the portable pedal – a reliable system of protection against injury; In one move, the blade beam is a segment of the band no longer than 2500. Cutting the sheets made with the use of rear stops, as well as markup.